SLIDING DOOR – TN 95 SV

The TN 95 SV guillotine door is used for cold rooms down to 0°C.Vertical sliding doors are mainly used in areas where there is insufficient space to install horizontal sliding doors. Constructed from a monolithic door leaf injected with high-density polyurethane foam, it is supplied on a PVC or wood-clad frame. The door’s seal is ensured by expanded EPDM gaskets fitted around the perimeter of the door leaf.

The vertical sliding system is fitted with two drive chains and two sliding guides on the right and left of the door; the door is balanced by a counterweight system to facilitate opening and closing. The door is equipped with a fall-arrest system, which activates in the event of a break in one of the drive chains and slows or stops the door’s descent.

• Type: Vertical sliding doors
• Material: Monolithic door leaf injected with high-density polyurethane foam; supplied on a PVC or wood-clad frame.
• Suitable for: Cold rooms up to 0°C
• Maximum dimensions: On request

• Designed for refrigerated environments requiring good thermal insulation, thanks to its high-density polyurethane foam door panel.

• It is mainly used where there is insufficient wall space for the installation of horizontal sliding doors, utilising vertical sliding action.

• It is installed in high-traffic areas thanks to the counterweight system, which facilitates opening and closing, combined with a safety system to prevent the door from falling.