PANELS - PSI - PSD VTR

The PSI and PSD polyurethane panels are Polistamp panels designed for the construction of industrial cold stores, and their key strength lies in their excellent insulating properties. The dry-joint interlocking system, featuring single and double teeth, ensures excellent insulation by eliminating thermal bridges and the formation of condensation. The inclusion of eccentric hooks, available on request, provides the joint with a better seal and greater airtightness.

Thicknesses:

PSI: 60 – 80 – 100 mm

PSD: 120 – 140 – 160 – 180 – 200 – 240 mm

Width (mm):

PSI/PSD: 1,000 – 1,200

Length (mm):

PSI/PSD: 8,350

Finishes:

Smooth

• Density: 40 ± 2 kg/m³ – Closed cells: 95–98%
• Operating temperature: -90 °C/+100 °C
• Adhesion strength: >0.018 MPa UNI EN 14509:2013
• Compressive strength: >0.150 MPa UNI EN 14509:2013
• Thermal conductivity: UNI EN 14509:2013
• Fire reaction of the sheet

Supports

Glass-fibre reinforced plastic – white, non-toxic, thickness 20/10. Smooth or ribbed with 90° edge. Smooth with PVC edge

Joints

Male/female PSI

Male/female PSI

Male/female PSD

Male/female PSD

• Specifically designed for the construction and insulation of temperature-controlled environments, for both refrigeration and freezing.

• The smooth finish makes these panels particularly suitable for the food and pharmaceutical industries and processing laboratories, where surfaces must be easy to clean and sanitise.

• Thanks to the flexibility of the thicknesses (ranging from the PSI series at 60–100 mm up to the PSD series at 240 mm) and the dry-joint interlocking system with single and double teeth, they are used wherever it is necessary to eliminate thermal bridges, prevent condensation and ensure maximum airtightness.