HFCs on the decline in Europe: how the role of F-gases in refrigeration is changing
HFCs continue to decline in the EU, but F-gases retain significant technical characteristics: the transition is changing refrigerants and design.
The reduction of HFCs in the European Union continues along the trajectory envisaged by the new F-Gas framework. In 2025, HFC supply decreased by 7% in physical quantities and 15% in CO₂ equivalent compared to the previous year, confirming the progressive replacement of fluids with the greatest climate impact.
However, the data also highlights a more complex market transformation. Refrigeration, air conditioning, and heat pumps remain among the main sectors using fluorinated gases, and while the use of natural refrigerants and low-GWP solutions is increasing, F-gases continue to offer the technical characteristics that have driven their widespread use for decades.
For HVAC/R designers and operators, the transition is therefore not simply about abandoning a family of refrigerants. The reduction in HFCs is progressively narrowing the available options and making it increasingly important to design systems based on the characteristics of the permitted fluids , balancing environmental impact, efficiency, and safety.
HFCs decrease especially in terms of climate impact
One of the most significant elements of the European data concerns the difference between physical quantities and CO₂ equivalent.
Overall, in 2025, European F-gas supply remained virtually stable in terms of mass, while decreasing by 12% in terms of CO₂ equivalent . This means that fluids with lower global warming potential are gradually increasing on the market, even while the overall quantity of refrigerant used is not decreasing to the same extent.
In the RACHP sector, refrigeration, air conditioning and heat pumps accounted for over 70% of applications in terms of mass and around 40% in terms of CO₂ equivalent.
At the same time, the role of regeneration is also growing. In 2025, the amount of HFCs regenerated in the EU increased by 5% compared to the previous year, reinforcing the importance of recovering and reusing refrigerants already present in systems.
The transition therefore simultaneously concerns new fluids, GWP reduction and better management of existing refrigerants .
Why F-gases have established themselves in refrigeration
The progressive reduction of fluorinated gases does not eliminate the technical reasons that favored their use.
F-gases have become popular because they combine low toxicity, low flammability, and thermodynamic properties that can be adapted to numerous applications . In particular, by modifying the structure and fluorine content of the molecules, it has been possible to develop refrigerants with different operating pressures, refrigeration capacities, and characteristics.
This flexibility has allowed for many years to select the coolant best suited to the machine's needs.
Natural alternatives, on the other hand, have more defined characteristics: hydrocarbons require particular attention to flammability, ammonia to toxicity, and CO₂ to high pressures and transcritical operation in various applications.
The transition to alternative refrigerants therefore remains technically possible, but requires more specific design and an evaluation of the entire system.
From choosing the refrigerant to designing around the fluid
The progressive reduction of fluorinated options could also profoundly change the way refrigeration equipment is developed.
In the past, it was often possible to start from the machine's needs and identify a refrigerant with compatible properties. In the future, the reverse approach will increasingly be used: starting from the available refrigerants and adapting the system's components and architecture to them .
This may mean addressing:
- refrigeration cycle configuration;
- type and sizing of compressors;
- more compact exchangers to reduce the charge;
- control systems;
- operating pressures and temperatures;
- security measures;
- circuit management and maintenance.
The refrigerant transition therefore also becomes a technological transition. It's not enough to identify a fluid with a lower GWP: it's necessary to verify that the entire system maintains efficiency, reliability, and safety under real-world operating conditions .
The future will be characterized by more diversified refrigerants
The reduction in HFCs therefore does not appear to lead to a single replacement refrigerant.
The market is likely to become progressively more diverse, with CO₂, ammonia, hydrocarbons, low-GWP fluorinated refrigerants, and other solutions being used depending on the characteristics of the individual application.
The European phase-down is already producing a measurable change in the climate impact of refrigerants placed on the market. At the same time, the need to maintain performance and safety makes the transition more complex than a simple fluid substitution.
For designers, manufacturers and maintenance technicians, the challenge will therefore be to manage a landscape in which the choice of refrigerant will be increasingly linked to the architecture of the system and its entire life cycle .
The progressive reduction in HFCs confirms the direction Europe has taken, but the process will require design innovation, expertise, and increasingly careful management of the refrigerants already present in the installed base.
Related Focus
FAQ – Domande frequenti
In 2025, the supply of HFCs in the EU decreased by 7% in physical quantities and by 15% in CO₂ equivalent compared to 2024.
Because they combine low flammability, low toxicity, and thermodynamic properties that can be adapted to the needs of numerous refrigeration and air conditioning equipment.
Natural alternatives exist for many applications, but each fluid has specific characteristics. CO₂, ammonia, and hydrocarbons require systems designed for high pressures, toxicity, or flammability, respectively, so substitution must be evaluated on a case-by-case basis.
