GK-Lab Kryon Refresh Periodic Cleaner for Condensers and Evaporators

Refresh is designated as a "daily cleaner" for routine interventions. By applying the product diluted according to the level of soiling, it facilitates the detachment of dust, grease, and deposits, thereby increasing airflow and overall system efficiency. For best results, it is recommended to spray the product against the direction of airflow to push dirt outward, making it easier to remove during rinsing.

Instructions for Use:

1. Power Off: Disconnect the system from the power supply before application.
2. Dilution: Dilute the product with water based on the surface and level of dirt (e.g., up to approx. 1:6 for evaporators and approx. 1:4 for condensers).
3. Application: Spray evenly onto the surfaces to be treated.
4. Dwell Time: Allow the product to act for a few minutes.
5. Rinsing: Rinse thoroughly to remove dirt and product residue.
6. Safety: Wear appropriate personal protective equipment (PPE) and consult the Safety Data Sheet (SDS) before use.

Refresh contains no dyes or fragrances. Its formulation is designed to be effective yet gentle on materials, offering a lower environmental impact compared to more aggressive detergents.

The product is available in the following sizes:

• 1 L Bottle with 360° Trigger: Practical for interventions on single units.
• 6 × 1 L Pack with 360° Triggers: A convenient solution for technicians or workshops performing repeated maintenance.
• 5 L Jerry Can: Professional format for frequent use or multiple systems.
• Kit of 4 × 5 L Jerry Cans: Ideal for high workloads or continuous maintenance in large-scale facilities.

Refresh is designed for the periodic or scheduled maintenance of heat exchangers:

• Regular cleaning of evaporators and condensers to maintain performance and energy efficiency.
• Removal of light residues and dirt deposits accumulated from indoor or outdoor air.
• Applications requiring a non-aggressive cleaner to preserve delicate materials.